| |
Unlike S hooks which
hang at a slant, our hanger rods have compound curves and hang
straight. These rods were designed to be used with the HD30B, HD40B,
HD48, GA18RT, GA27RT and all commercial racks with a COM prefix.
If you have ceilings 9
feet or over you may want to consider our rack hanger rods. Quick
links are not necessary to fasten hanger rods to your rack or your
ceiling hooks and we make them with a 8 1/2 inch drop, 12 inch, 15
1/2 inch, 20 inch, 24 inch, 27 1/2 and 30 inch drop. See recommended
lengths below.
1/4 Solid stainless
steel rack hanger rods:
For a drop of less
than 8 1/2", look at our 3 1/2" and 5 1/2 " S-Hooks.
For a drop of over
30", you could use a combination of lengths.
Recommended
hanger rod lengths for people from 5' 4" to 5' 10" tall. If you are
under 5' 3", you might want to move up one length and if you are
over 6', you might want to move down one length. It would not hurt
to take some measurements.
-
For the HD30B,
HD40B, HD48B, GA18RT and GA27RT
-
For the Commercial
Series: (with a COM prefix)
-
9 foot ceiling --
15 1/2"
-
10 foot ceiling -
27 1/2"
-
NOTE: You
will need 4 hangers for all commercial racks above.
|
|
